ISO 4028 hexagon socket set screw, dog point, M5
Size drawing - M5 values on the views - | = 8 shown: enlarged 10:1
Sym. Dimensi
Thread pitch d1 = 4.134
Socket across flats a <= 50° (CH)
Socket across corners
Socket depth, short lengths
Socket depth, other lengths
3.35 3.2-3.5
Dog diameter
| = 8 shown
1.375 lengths 6-25 Dog length, short lengths 1.25-1.50
2.625 2.50-2.75
Dog length, other lengths
B s 50° (ISO 4753 SD/LD) < 50 Dog chamfer to axis, deg ~
Basic minor diameter (end face)
Z= 2.625 Tap drill (method d - P) 2.50-2.75
Socket-end chamfer angle, deg dp = 3.35 3.2-3.5
Source levels
View on the socket end Main value = the modeled value (nominal, else the middle of min-max).
1 Grey under a value = its min-max, where the source gives both. < / = = the source gives only that limit, modeled at it. ref = reference. L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate. LO = one source only: printed amber and marked *. c = a source value was corrected; the datasheet says how. House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L2 6 - L117. Notes Short lengths (sheet DO1) take the 'short' t and z.
s=2.55 2,52-2.58
TITLE
'? CommunityCAD Size drawing, M5
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 4028:2003 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Set screw, dog point - M5
SHEET REV SCALE PROJECTION UNITS CC-1S804028-SZ-M5 A 10:1 € Dimensions in mm SPEC VERSION LICENSE PAGE
cfd05b053c736a4F15ba3030aa41Febd40cdc205 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
