'?) CommunityCAD
CC-1S04028-DS-M5 revA Size datasheet - MS
ISO 4028 M5 hexagon socket set screw, dog point
Size datasheet: this size's values with their levels, its lengths, conventions and sources.
Thread
Lengths Files
Simplified - M5x10, front view, 5:1 Threaded - M5x10, front view, 5:1
Sym. Dimension
P Thread pitch
s Socket across flats
e Socket across corners
t Socket depth, short lengths
t Socket depth, other lengths
dp Dog diameter
Zz Dog length, short lengths
Zz Dog length, other lengths
8 Dog chamfer to axis, deg
d1 Basic minor diameter (end face) tap Tap drill (method d - P)
a Socket-end chamfer angle, deg
M5 x 0.8, ISO metric coarse, right hand
7 generated, | = 6-25
14 STEP AP214 (simplified + threaded)
Value Level 0.8 L1 +3 2.55 L1- 2 2.52-2.58 2 2.873 l1- 3 >2 L1 +3 >3 L1 +3 3.35 L1 + 2 3.2-3.5 1.375 1-3 1.25-1.50 2.625 ll: 3 2.50-2.75 < 50 L2+1 4.134 l1 +2 4.2 L1- 2 < 50 2-1
Modeled value: nominal, else the midpoint of min-max. < / 2: only that limit is given, modeled at the limit. * amber: one source (LO). c: a source
value was corrected. Level - independent sources.
ISO 4028:2003 - ISO 4753:2011 (ends) - ISO 68-1 / ISO 261 (thread) Set screw, dog point : M5 - both detail levels - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
Page 1/2
spec cfd05b053c736a4f15ba3030aa41Febd40cdc205
---
CC-1S04028-DS-M5 revA Size datasheet - M5
'?) CommunityCAD
Lengths | Thread t z Part key 6 full, short 22 1.375 is04028-m5x6 8 full, long 23 2.625 is04028-m5x8 10 full, long 23 2.625 is04028-m5x10 12 full, long 23 2.625 is04028-m5x12 16 full, long 23 2.625 is04028-m5x16 20 full, long >3 2.625 iso4028-m5x20 25 full, long 23 2.625 is04028-m5x25
Fully threaded. t = the socket depth modeled (t min, short or long by length). Which lengths are short has one source (LO, #584 item 4).
Conventions
« Socket end: ISO 4753 chamfered end (CH), end face at d1, chamfer at the angle limit. * Socket: regular hexagon at the modeled s, sharp corners, one corner on +X, flat floor at t min.
« Dog: a plain cylinder at dp and z (midpoints; z_short or z_long by length), no thread, below a chamfer at the angle limit to the axis (ISO 4753 SD/LD). The 'slight radius' edges are sharp: the standard gives no size.
« Thread (threaded level): ISO 68-1 basic profile, the full length, cut by both ends. « Values given only as a limit are modeled at that limit. Features the standard does not dimension are house conventions.
Sources
Source Publisher Retrieved sha256 amesweb-tap-drill AMESweb 2026-10-23 e6501cc1414a pule-tap-drill CommunityCAD 2026-10-23 625b582c306e pule-basic-minor CommunityCAD 2026-10-23 00329692204 iso4753-2011-sample ISO (preview published by iTeh Standards) n/a 7526d25F9381 (kept outside the repo) fuller-iso4026 Fuller Fasteners 2026-10-25 49ba2edb36b7 fuller-iso4027 Fuller Fasteners 2026-10-25 03523ae5e142 fuller-iso4028 Fuller Fasteners 2026-10-25 Of0a658d8693 fuller-iso4029 Fuller Fasteners 2026-10-25 d420eSe6b5F8 fasten-it-is04026 fasten.it 2026-10-25 e111077c7750 fasten-it-iso4027 fasten.it 2026-10-25 4e60ee0a98b6 fasten-it-is04028 fasten.it 2026-10-25 b1f3ca7c19bé fasten-it-iso04029 fasten.it 2026-10-25 198cb790d686 amesweb-is04026-4029 AMESweb 2026-10-25 0643acf2a4F2
The whole series (verification map, corrections, drawings): CC-ISO4028-DS.
ISO 4028:2003 - ISO 4753:2011 (ends) - ISO 68-1 / ISO 261 (thread) Page 2/2 Set screw, dog point : M5 - both detail levels - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec cfd05b053c736a4f15ba3030aa41f ebd40cdc205
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
