ISO 4028 hexagon socket set screw, dog point, M5
Size drawing - M5 values on the views - | = 8 shown: enlarged 10:1
Sym. Dimensi
Thread pitch
d1 = 4.134
rt a < 50° (CH) Socket across flats
Socket across corners Socket depth, short lengths
Socket depth, other lengths
3.35 3.2-3.5
Dog diameter
1.375 lengths 6-25 Dog length, short lengths 1.25-1.50
2.625 2.50-2.75
Dog length, other lengths
B s 50° (ISO 4753 SD/LD) < 50 Dog chamfer to axis, deg ~
Z = 2.625 2.50-2.75
Basic minor diameter (end face)
Tap drill (method d - P)
Socket-end chamfer angle, deg
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
' L2 = the standard itself (or its complete free preview, or the maker's drawing). View on the socket end L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L2 6 - L117.
Notes
Short lengths (sheet DO1) take the 'short' t and z.
TITLE
'? CommunityCAD Size drawing, M5
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 4028:2003 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Set screw, dog point - M5
SHEET REV SCALE PROJECTION UNITS CC-1S804028-SZ-M5 A 10:1 € Dimensions in mm SPEC VERSION LICENSE PAGE
82d0e3f1e4052a4ecS59d0F9Fd7b4cF7b5772671 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.