M5 Cup Point Set Screw, ISO 4029 size drawing (PDF)

Datasheet — M5 Cup Point Set Screw, ISO 4029 by Milo

Open the PDF
M5 Cup Point Set Screw, ISO 4029Get the CAD modelM5 Cup Point Set Screw, ISO 4029CC-ISO4029-SZ-M5.pdf

Text of this datasheet

ISO 4029 hexagon socket set screw, cup point, M5

Size drawing - M5 values on the views - | = 6 shown - enlarged 10:1

Sym. Dimensi

Thread pitch

d1 = 4.134

Socket across flats

a = 50° (CH)

Socket across corners Socket depth, short lengths Socket depth, other lengths

Pn 2.375 | = 6 shown Cup rim diameter lengths 5-25 2.25-2.50

. < 50 Cup chamfer to axis, deg

6 = 120° ref, recess (ref)

Cup recess angle, deg

Basic minor diameter (end face)

B s 50° (ISO 4753 CP)

Tap drill (method d - P)

2.25-2.50 Socket-end chamfer angle, deg

View on the socket end 1

Source levels

Main value = the modeled value (nominal, else the middle of min-max).

Grey under a value = its min-max, where the source gives both.

< / = = the source gives only that limit, modeled at it. ref = reference.

L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate.

LO = one source only: printed amber and marked *.

c = a source value was corrected; the datasheet says how.

House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L2 6 - L117.

Notes

Short lengths (sheet DO1) take the 'short' t.

TITLE

'? CommunityCAD Size drawing, M5

STANDARDS FOLLOWED FAMILY / DETAIL

ISO 4029:2003 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Set screw, cup point - M5

SHEET REV SCALE PROJECTION UNITS CC-1S804029-SZ-M5 A 10:1 € Dimensions in mm SPEC VERSION LICENSE PAGE cfd05b053c736a4F15ba3030aa41febd40cdc205 CC-BY 4.0 IronPixel Labs LLC 1/1

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.