ISO 4029 hexagon socket set screw, cup point, M5
Size drawing - M5 values on the views - | = 6 shown - enlarged 10:1
Thread pitch
Socket across flats
a = 50° (CH)
Socket across corners
Socket depth, short lengths
Socket depth, other lengths
Pn 2.375 | = 6 shown Cup rim diameter lengths 5-25 2.25-2.50
. < 50 Cup chamfer to axis, deg
6 = 120° ref, recess (ref)
Cup recess angle, deg
Basic minor diameter (end face)
B s 50° (ISO 4753 CP) Tap drill (method d - P)
dz 375 2.25-2.50
Socket-end chamfer angle, deg
Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both. < / = = the source gives only that limit, modeled at it. ref = reference. L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate. LO = one source only: printed amber and marked *. c = a source value was corrected; the datasheet says how. House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L2 6 - L117. Notes $= 2.55 Short lengths (sheet DO1) take the 'short' t. 2.52-2.58
1 View on thd socket end
TITLE
'? CommunityCAD Size drawing, M5
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 4029:2003 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Set screw, cup point - M5
SHEET REV SCALE PROJECTION UNITS CC-1S804029-SZ-M5 A 10:1 € Dimensions in mm
SPEC VERSION LICENSE PAGE 82d0e3f1e4052a4ec559d0F9Fd7b4cF7b5772671 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.