ISO 4027 hexagon socket set screw, cone point, M5
Size drawing - M5 values on the views - | = 8 shown: enlarged 10:1
Sym. Dimensi
Thread pitch d1 = 4.134
Socket across flats Gok a < 50° (CH) 2.52-2.58
2 2.873 Socket across corners
Socket depth, short lengths Socket depth, other lengths Cone flat diameter
|= 8 shown ; lengths 5-25 Cone angle (included), deg
Cone angle, short lengths, deg
Basic minor diameter (end face)
Tap drill (method d - P)
y = 90°, included (ISO 4753 TC)
Socket-end chamfer angle, deg
Source levels dt < 1.25 Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both. < / = = the source gives only that limit, modeled at it. ref = reference. L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate. LO = one source only: printed amber and marked *. c = a source value was corrected; the datasheet says how. House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L2 6 - L117. Notes Short lengths (sheet DO1) take the 'short' t and the cone angle.
View on the socket end
~ ({- 2.52-2.58 . . . \ TITLE
e= 2.873 '? CommunityCAD Size drawing, M5
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 4027:2003 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Set screw, cone point - M5
SHEET REV SCALE PROJECTION UNITS CC-1S804027-SZ-M5 A 10:1 € Dimensions in mm SPEC VERSION LICENSE PAGE cfd05b053c736a4F15ba3030aa41febd40cdc205 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
