ISO 4027 hexagon socket set screw, cone point, M5
Size drawing - M5 values on the views - | = 8 shown: enlarged 10:1
|= 8 shown lengths 5-25
d1 = 4.134
an
1 View on thd socket end
s=2.55
a = 50° (CH)
y = 90°, included (ISO 4753 TC)
2.52-2.58
©
'? CommunityCAD
Thread pitch
Socket across flats
>
Socket across corners
Socket depth, short lengths
Socket depth, other lengths
Cone flat diameter
Cone angle (included), deg
Cone angle, short lengths, deg
Basic minor diameter (end face)
Tap drill (method d - P)
Socket-end chamfer angle, deg
2.55 2.52-2.58
2.873
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how. House convention = a detail no source dimensions, drawn to a stated house rule.
This size's values: L2 6 - L117. Notes
Short lengths (sheet DO1) take the 'short' t and the cone angle.
TITLE
Size drawing, M5
STANDARDS FOLLOWED ISO 4027:2003 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread)
FAMILY / DETAIL Set screw, cone point - M5
SHEET
CC-1S04027-SZ-MS
REV SCALE
A 10:1
PROJECTION UNITS
Dimensions in mm
SPEC VERSION 82d0e3f1e4052a4ecS59d0F9Fd7b4cF7b5772671
LICENSE
CC-BY 4.0 IronPixel Labs LLC
PAGE
1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.