M5 Button Head Screw, ISO 7380-1 size drawing (PDF)

Datasheet — M5 Button Head Screw, ISO 7380-1 by Milo

Open the PDF
M5 Button Head Screw, ISO 7380-1Get the CAD modelM5 Button Head Screw, ISO 7380-1CC-ISO7380-SZ-M5.pdf

Text of this datasheet

ISO 7380-1 hexagon socket button head screw, M5

Size drawing - M5 values on the views - | = 16 shown - enlarged 5:1

Source levels MS Main value = the modeled value (nominal, else the middle of min-max). Thread pitch 9.8 Grey under a value = its min-max, where the source gives both. dk = 9.32 9.32 = / = = the source gives only that limit, modeled at

Head diameter 9.14-9.50 9.14-9.50 it. ref = reference.

T _ . . dL = 5.0 ref ; ; 2.625 L2 = the standard itself (or its complete free . rf = 5.50 (dome, on the axis) Head height 5 50-2.78 preview, or the maker's drawing). : . L1 = two or more independent sources agree: the 5.0 ref release gate.

LO = one source only: printed amber and marked

Flat top diameter

*

. 5.50 | w 2 0.38 Dome radius 5.25-5.75 c = a source value was corrected; the datasheet

says how. 3.050 ion = il Socket across flats House convention = a detail no source STARS dimensions, drawn to a stated house rule. > 3.443 This size's values: L2 16 - L16. Notes

1.56 s: the nominal is the key size; the socket is

Socket depth . modeled at the middle of its band.

rs 2 0.20, da < 5.7 Socket across corners

0.38

Wall under socket

| = 16 shown

lengths 8-50 9 Underhead fillet, part thread 8/20

Underhead fillet, full thread Shank diameter

= 50° (ISO 4753 CH)

Transition diameter

Bearing face diameter

d1 = 4134 Thread length

Basic minor diameter (end face)

View from above Tap drill (method d - P)

End chamfer angle, deg

s = 3.050 3.020-3.080

TITLE

'? CommunityCAD Size drawing, M5

STANDARDS FOLLOWED FAMILY / DETAIL

ISO 7380-1:2011 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Button head screw - MS

SHEET REV SCALE PROJECTION UNITS CC-1S07380-SZ-M5 A 5:11 € Dimensions in mm SPEC VERSION LICENSE PAGE cfd05b053c736a4F15ba3030aa41febd40cdc205 CC-BY 4.0 IronPixel Labs LLC 1/1

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.