ISO 7380-1 hexagon socket button head screw, M5
Size drawing - M5 values on the views - | = 16 shown - enlarged 5:1
|= 16 shown lengths 8-50
dk = 9.32 9.14-9.50
dL = 5.0 ref
ro
rf = 5.50 (dome, on the axis) 5.25-5.75
k = 2.625 it = 1.56
75
[w= 0.38
—=a
Lasker
d1 = 4.134
View fro}
s = 3.050
rs 2 0.20, da < 5.7
= 50° (ISO 4753 CH)
3.020-3.080
Thread pitch
Head diameter
Head height
Flat top diameter
Dome radius
Socket across flats
Socket across corners
Socket depth
Wall under socket
Underhead fillet, part thread
Underhead fillet, full thread
Shank diameter
Transition diameter
Bearing face diameter
Thread length
Basic minor diameter (end face)
Tap drill (method d - P)
End chamfer angle, deg
Source levels
MS Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both.
9.32 </ 2 = the source gives only that limit, modeled at 9.14-9.50 it. ref = reference. L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the 5.0 ref release gate.
LO = one source only: printed amber and marked *
0.8
2.625 2.50-2.75
5.50 5.25-5.75 c = a source value was corrected; the datasheet
says how.
3.058 House convention = a detail no source
STARS dimensions, drawn to a stated house rule.
> 3.443 This size's values: L2 16 - L16. Notes s: the nominal is the key size; the socket is
Tots modeled at the middle of its band.
0.38
0.20
TITLE
'? CommunityCAD
Size drawing, M5
STANDARDS FOLLOWED ISO 7380-1:2011 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread)
FAMILY / DETAIL Button head screw - MS
SHEET REV SCALE
CC-1S07380-SZ-MS A 5:1
PROJECTION UNITS
Dimensions in mm
SPEC VERSION LICENSE 82d0e3F1e4052a4ec559d0F9Fd7b4cF7b5772671
PAGE
CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.