ISO 4762 hexagon socket head cap screw, M4
Size drawing - M4 values on the views - | = 12 shown - enlarged 5:1
Source levels Sym. | Dimensi Main value = the modeled value (nominal, else the middle of min-max). Thread pitch 9.7 Grey under a value = its min-max, where the source gives both. 6.89 < / = = the source gives only that limit, modeled at it. 6.78-7.00 ref = reference. L2 = the standard itself (or its complete free preview, $7.22 or the maker's drawing). L1 = two or more independent sources agree: the View from above Head height 3.91 release gate. _— . | 3.P-AD LO = one source only: printed amber and marked *. c = a source value was corrected; the datasheet says 3.05 how. 3.02-3.08 House convention = a detail no source dimensions,
Head diameter, plain
Head diameter, knurled
Socket across flats
s = 3.05 3.02-3.08 > 3.443 drawn to a stated house rule. - Socket across corners This size's values: L2 1- L119 - LO 2.
Notes r= 0.275*, da <= 4.7 s: the nominal is the key size; the socket is modeled at
Socket depth r0.2-0.35 joener oP the middle of its band.
Wall under socket | = 12 shown lengths 6-40
Head top chamfer 8-4
0.275* 0.2-0.35
Underhead fillet radius < 50° (ISO 4753 CH) 3.91 3.82-4.00
Shank diameter
< Transition diameter S Got
d1 = 3.2422 |
> Bearing face diameter =)6-55
Thread length As) Pe
Basic minor diameter (end face) 3.2422
Tap drill (method d - P) 3.3
End chamfer angle, deg
TITLE
'? CommunityCAD Size drawing, M4
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 4762:2004 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Socket head cap screw - M4 SHEET REV SCALE PROJECTION UNITS CC-1804762-SZ-M4 A 5:11 € Dimensions in mm
SPEC VERSION LICENSE PAGE cfd05b053c736a4F15ba3030aa41febd40cdc205 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
