ISO 7092 plain washer, small series, grade A, M4
Size drawing - M4 values on the views - enlarged 10:1
i
SR |
h=0.5 0.45-0.55
d1= 4.30" 4.30-4.48
d2 = 8.00 7.64-8.00
View from above
Dimension
4.30 4.30-4.48
Hole diameter (nom = min)
8.00 7.64-8.00
Outside diameter (nom = max)
0.5 0.45-0.55
Thickness
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L2 3.
Notes
d1 nom = d1 min and d2 nom = d2 max (the standard's own convention); h nom lies in its band.
Edges are sharp, walls square to the faces: house conventions, sheet DO2.
TITLE
'? CommunityCAD Size drawing, M4
‘STANDARDS FOLLOWED ISO 7092:2000
FAMILY / DETAIL
Plain washer, small series - M4
SHEET
CC-1S07092-SZ-M4
REV SCALE PROJECTION UNITS
A 10:1 Dimensions in mm
SPEC VERSION
LICENSE
e€79bc69C722a7450eb0be681b46a36c48d05506e CC-BY 4.0 IronPixel Labs LLC
PAGE
1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.