M4 Serrated Lock Washer, Form V (Countersunk), DIN 6798

The M4 serrated lock washer (DIN 6798, form V, countersunk) is 0.5 mm thick, with a 4.3 mm hole and an outside diameter of 8 mm. It has 14 teeth. It sits under M4 screw heads and nuts; here as simplified STEP files.

How these parts are made, and what the levels mean: read the method

• Also searched as: M4 washer
• Model id: din6798-v-m4
• Standard: DIN 6798:1988 · size M4

Files

Part key	Simplified
din6798-v-m4	STEP

Dimensions

Symbol	Name	min	nom	max	Modeled	Rule	Level
d1	Inside diameter	4.3	4.3	4.48	4.3	nominal	L1
d3	Outside diameter, form V		8	8	8	nominal	L1
s2	Sheet thickness, form V		0.25		0.25	nominal	L1
teeth_V	Number of teeth, form V	14			14	single limit (min), modeled at the limit	L1

Drawing

As a PDF: CC-DIN6798-SZ-M4.pdf.

The M4 form V serrated lock washer beside the M3 and the M5

The M4 is number 4, counting from the smallest, of the 7 DIN 6798 serrated lock washers published here, from M2 to M8.

• Inside diameter (d1): 4.3 mm on the M4 form V serrated lock washer, against 3.2 mm on the M3 and 5.3 mm on the M5.
• Outside diameter (d3): 8 mm on the M4 form V serrated lock washer, against 6 mm on the M3 and 9.8 mm on the M5.
• Sheet thickness (s2): 0.25 mm on the M4 form V serrated lock washer, against 0.2 mm on the M3 and 0.3 mm on the M5.
• Number of teeth (teeth_V): at least 14 on the M4 form V serrated lock washer, against at least 12 on the M3 and at least 14 on the M5.

The M4 form V serrated lock washer in its other forms

• M4 Serrated Lock Washer, Form A (External Teeth), DIN 6798: sheet thickness 0.5 mm, number of teeth at least 11.
• M4 Serrated Lock Washer, Form J (Internal Teeth), DIN 6798: sheet thickness 0.5 mm, number of teeth at least 8.

Other sizes

• One size smaller: M3 Serrated Lock Washer, Form V (Countersunk), DIN 6798, 3.2 mm hole, 6 mm OD.
• One size larger: M5 Serrated Lock Washer, Form V (Countersunk), DIN 6798, 5.3 mm hole, 10 mm OD.

Documents

• CC-DIN6798-DS-M4.pdf: M4 datasheet: values with levels, sources
• CC-DIN6798-SZ-M4.pdf: M4 drawing: this size's values on the views
• parts.json: the part record of this size (the platform contract)

Sources

bossard-bn786, engineersedge-din6798, fasten-it-din6798, globalfastener-din6798-a, globalfastener-din6798-j, globalfastener-din6798-v. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.