PCB standoff, metric hex, M4 AF 7
Size drawing - M4 AF 7 values on the views - | = 14 shown, male/female - enlarged 5:1
Sym. | Dimensio
7 6.80-7.00
Width across flats Body length (shown; every length on DO2) 14 Female thread depth, smallest stated
Male stud length
30° chamfer, illustrative
Thread pitch
|= 14 shown lengths 6-40
Drill point's diameter at t
Ne d1 Stud end face (ISO 4753 CH)
End view
Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference. L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate. LO = one source only: printed amber and marked *. c = a source value was corrected; the datasheet says how. House convention = a detail no source dimensions, drawn to a stated house rule. Notes No published standard: L1 = two makers agree (ADR 0034). t: the smallest depth any maker states or guarantees for the shape; b: the stud two makers state, else the shortest (#1116 item 3, #1207). Both vary with I: see DO2. Illustrative (house rule): 30° corner chamfers to a circle of s, the 118° drill point starting at t, the 90° countersink to D (#1116, #1207). Not from any maker. Shown in brass: the house's illustrative finish; makers sell several materials. Side view
TITLE
'? CommunityCAD Size drawing, M4 AF 7
STANDARDS FOLLOWED FAMILY / DETAIL
No published standard - Ettinger, Keystone, Harwin (ADR 0034) PCB standoff - hex - metric - M4 AF 7 SHEET REV SCALE PROJECTION UNITS CC-STANDOFF-SZ-M4-s7 A 5:11 € Dimensions in mm SPEC VERSION LICENSE PAGE
70b2bf787ea8F07904ce030afSObcaf231F0c68F CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.