M4 Nylon Insert Lock Nut, ISO 10511 datasheet (PDF)

Datasheet — M4 Nylon Insert Lock Nut, ISO 10511 by Milo

Open the PDF
M4 Nylon Insert Lock Nut, ISO 10511Get the CAD modelM4 Nylon Insert Lock Nut, ISO 10511CC-ISO10511-DS-M4.pdf

Text of this datasheet

CC-1S010511-DS-M4 revA Size datasheet - M4

'?) CommunityCAD

ISO 10511 M4 nylon insert lock nut

Size datasheet: this size's values with their levels, conventions and sources.

Thread M4 x 0.7, ISO metric coarse, right hand Part key iso10511-m4 Files 2 STEP AP214 (simplified + threaded) Threaded - M4, front view, 4:1 Sym. Dimension Value Level P Thread pitch 0.7 L2-2 s Width across flats 6.89 L2 6.78-7.00 e Width across corners > 7.66 h Nut height (to the collar top) 4.76 L2 4.52-5.00 mw Wrenching height 2 1.56 dw Bearing face diameter > 5.90 da Countersink diameter 4.30 L2 4.00-4.60 B Corner chamfer angle, deg 22.5 L2 15-30 8 Countersink angle, deg 105 L2 90-120 D1 Basic minor diameter (crests) 3.2422 L1- 2 tap Tap drill (method D - P) 3.3 La + 2

Modeled value: nominal, else the midpoint of min-max. < / =: only that limit is given. * amber: one source (LO). c: a source value was corrected. Level - independent sources. e follows from s and is checked = e min; dw min sets the chamfer's face circle and the collar; mw min is checked at mid-flat.

ISO 10511:2012 (withdrawn) - ISO 68-1/ ISO 261 (thread) Page 1/2 Lock nut - M4 - both detail levels - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec cfd05b053c736a4f15ba3030aa41f ebd40cdc205

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.

---

CC-1S010511-DS-M4 revA Size datasheet - M4

'?) CommunityCAD

Conventions

e Hexagon: regular at the modeled s (the middle of its band), one corner on +X, sharp edges.

« Corner chamfer on both hexagon faces: a cone at B (range midpoint) meeting the face on (dw min + s) / 2. Not specified by the standard.

« Countersink on the bearing face at da and 8, both at their range midpoints.

¢ Collar dw min across from m to h, wall and lip t = (dw min - D) / 4, top edge rounded at t; the nylon insert its own solid from m to h - t. Not specified by the standard.

« Bore: plain at D (simplified); ISO 68-1 basic internal thread through m, insert bore at D1 (threaded).

« No washer face, no markings. Values given only as a limit are modeled at that limit. Features the standard does not dimension are house conventions.

Sources Source Publisher Retrieved sha256 amesweb-tap-drill AMESweb 2026-10-23 e6501cc1414a pule-tap-drill CommunityCAD 2026-10-23 625b582c306e pule-basic-minor CommunityCAD 2026-10-23 00329692204 fasten-it-iso10511 fasten.it 2026-10-25 2f7b7c8F22c9 iso10511-2012-sample ISO (preview published by iTeh Standards) n/a d8f9b2cébe33 (kept outside the repo)

The whole series (verification map, corrections, drawings): CC-ISO10511-DS.

ISO 10511:2012 (withdrawn) - ISO 68-1/ ISO 261 (thread) Page 2/2 Lock nut - M4 - both detail levels - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec cfd05b053c736a4f15ba3030aa41f ebd40cdc205

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.