DIN 7984 low head socket cap screw, M4
Size drawing - M4 values on the views - | = 12 shown - enlarged 5:1
Source levels Main value = the modeled value (nominal, else the middle of min-max). Thread pitch 9.7 Grey under a value = its min-max, where the source gives both. 6.89 < / = = the source gives only that limit, modeled at it. 1 Beadidiemeten 6.717 ref = reference. View fro L2 = the standard itself (or its complete free preview, Head height 2.73 or the maker's drawing). 2.66-2.8 L1 = two or more independent sources agree: the 2.56 release gate. Socket across flats 9 .50-9.6 LO = one source only: printed amber and marked *. c = a source value was corrected; the datasheet says 2 2.87 how. House convention = a detail no source dimensions,
Sym. Dimensi
Socket across corners
2.3 drawn to a stated house rule.
Socket depth This size's values: L2 1- L116 - LO 3.
2.18-2.42 r= 0.275%, da < 4.7 Notes oe” 0.4* s: the nominal is the key size; the socket is modeled at
the middle of its band.
Head top chamfer
|= 12 shown lengths 6-40 Underhead fillet radius
Shank diameter
= 50° (ISO 4753 CH)
Transition diameter
Bearing face diameter
d1 = 3.2422 Thread length
Basic minor diameter (end face)
Tap drill (method d - P)
End chamfer angle, deg
TITLE
'? CommunityCAD Size drawing, M4
STANDARDS FOLLOWED FAMILY / DETAIL
DIN 7984:2022 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Low head cap screw - M4
SHEET REV SCALE PROJECTION UNITS CC-DIN7984-SZ-M4 A 5:11 € Dimensions in mm
SPEC VERSION LICENSE PAGE 82d0e3f1e4052a4ec559d0F9Fd7b4cF7b5772671 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.