ISO 4017 hexagon head screw, M4
Size drawing - M4 values on the views - | = 20 shown: enlarged 5:1
Sym. Dimensi
Thread pitch
6.89 6.78-7.00
Width across flats
> Width across corners 2 7.66
k= 2.8 2.675-2.925 2.8
2.675-2.925
Head height
0.70-2.10 > 1.87
Wrenching height dw = 6.20c —~ snes
0.275 Washer face height r20.20, da < 4.7 g 0.15-0.40
> Bearing face diameter 2 6.20¢
Head top chamfer, deg
| = 20 shown Underhead fillet radius lengths 8-40
Transition diameter
1.40 6.70-2.10
Thread run-out under head
Basic minor diameter (end face) 3.2422
< 50° (Iso 4753 CH) Tap drill (method d - P)
End chamfer angle, deg
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing). View fro L1 = two or more independent sources agree: the release gate. LO = one source only: printed amber and marked *. c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L2 15 - L16. Notes s: modeled at the middle of its band; e and kw are checks, not modeled. s = 6.89 - - 6.78-7.00 TITLE
'? CommunityCAD Size drawing, M4
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 4017:2022 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Hex head screw - M4
SHEET REV SCALE PROJECTION UNITS CC-1S804017-SZ-M4 A 5:11 € Dimensions in mm
SPEC VERSION LICENSE PAGE €05¢8289049003c09e32d8bd4ae913179e09a28c CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.