ISO 4014 hexagon head bolt, M4
Size drawing - M4 values on the views - | = 25 shown - enlarged 2:1
Source levels Sym. Dimensi Main value = the modeled value (nominal, else the
middle of min-max). Thread pitch . Grey under a value = its min-max, where the source gives both. 6.89 < / = = the source gives only that limit, modeled at 6.78-7.00 it. ref = reference. _ ° L2 = the standard itself (or its complete free B ~ 22.5° Width across corners 2 7.66 preview, or the maker's drawing).
k=2.8 L1 = two or more independent sources agree: the 675=2.925 tc = 0.275 release gate.
T015-0.40 : 2.8 ° : dw = 6.20c —— Beadihelant »675-2.995 LO = one source only: printed amber and marked *. r2=0.20, das 4.7 : c = a source value was corrected; the datasheet
= 0.20, =4. Ig < 11.0, Is = 7.5 2 1.87 says how.
Wrenching height . . House convention = a detail no source dimensions,
Width across flats
0.275 drawn to a stated house rule.
|= 25 shown Washer face height 9 15-0 40 This size's values: L2 15 - L16.
lengths 25-40 . Notes
2 6.20c s: modeled at the middle of its band; e and kw are
checks, not modeled.
Bearing face diameter
Head top chamfer, deg
= 50° (ISO 4753 CH)
Underhead fillet radius
Transition diameter
3.91 3.82-4.00
Shank diameter View from above
Thread length a8 (ee
s=6.89
6.78-7.00 Transition length
Basic minor diameter (end face)
Tap drill (method d - P)
End chamfer angle, deg
TITLE
'? CommunityCAD Size drawing, M4
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 4014:2022 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Hex head bolt - M4
SHEET REV SCALE PROJECTION UNITS CC-1S804014-SZ-M4 A 2:1 € Dimensions in mm SPEC VERSION LICENSE PAGE
e05c8289049003c09e32d8bd4ae913179e09a28c CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.