'?) CommunityCAD
CC-1S04014-DS-M4 revA Size datasheet - M4
ISO 4014 M4 hexagon head bolt
Size datasheet: this size's values with their levels, its lengths, conventions and sources.
Thread
Lengths Files
Simplified - M4x25, front view, 2:1 Threaded - M4x25, front view, 2:1
Sym. Dimension
P Thread pitch
s Width across flats
e Width across corners
k Head height
kw Wrenching height
ic Washer face height
dw Bearing face diameter B Head top chamfer, deg r Underhead fillet radius da Transition diameter
ds Shank diameter
b Thread length
lf Transition length
di Basic minor diameter (end face) tap Tap drill (method d - P) a End chamfer angle, deg
M4 x 0.7, ISO metric coarse, right hand
4 generated, | = 25-40
8 STEP AP214 (simplified + threaded)
Value 0.7
6.89 6.78-7.00
2 7.66
2.8 2.675-2.925
2 1.87
0.275 0.15-0.40
2 6.20c
22.5 15-30
2 0.20 $4.7
3.91 3.82-4.00
14 ref $1.2
3.2422 3.3 L1- 2
< 50 2-1
Modeled value: nominal, else the midpoint of min-max. s / =: only that limit is given, modeled at the limit. * amber: one source (LO). c: a source
value was corrected. Level - independent sources.
ISO 4014:2022 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Hex head bolt - M4 - both detail levels - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
Page 1/2
spec e05c8289049003c09e32d8bd4ae913179e09a28c
---
CC-1S04014-DS-M4 revA Size datasheet - M4
'?) CommunityCAD
Lengths | Thread Is Ig Part key 25 partial 27.5 $11.0 is04014-m4x25 30 partial 2 12.5 $16.0 is04014-m4x30 35 partial 217.5 $21.0 is04014-m4x35 40 partial > 22.5 < 26.0 is04014-m4x40
Is = plain shank (min), Ig = bearing face to the first full thread (max).
Conventions
« End: ISO 4753 chamfered end (CH), end face at d1, chamfer at the angle limit.
« Head: hexagon at the modeled s, one corner on +X; washer face (dw min + s) / 2, c high; top chamfer at B (house construction, ADR 0052 amendment 1).
¢ Thread (threaded level): ISO 68-1 basic profile, right hand.
« Values given only as a limit are modeled at that limit. Features the standard does not dimension are house conventions.
Sources
Source Publisher Retrieved sha256
amesweb-tap-drill AMESweb 2026-10-23 e6501cc1414a
pule-tap-drill CommunityCAD 2026-10-23 625b582c306e
pule-basic-minor CommunityCAD 2026-10-23 00329692204
iso4753-2011-sample ISO (preview published by iTeh Standards) n/a 7526d25f9381 (kept outside the repo) iso4017-2022-sample ISO (preview published by iTeh Standards) n/a £41658422832 (kept outside the repo) iso4017-2022-sample-figure ISO (preview published by iTeh Standards) n/a £41658422832 (kept outside the repo) iso4014-2022-sample ISO (preview published by iTeh Standards) n/a 2e44b7555604 (kept outside the repo) fasten-it-iso4017 fasten.it 2026-10-25 395693958e2b
fasten-it-iso4014 fasten.it 2026-10-25 50a81d6072b8
fasteners-eu-iso4017 fasteners.eu 2026-10-25 161753a8c338
globalfastener-iso4017 globalfastener.com (Internet Archive copy, 2026-10-25 6c30078c626e
captured 2020-07-12)
globalfastener-iso4017-2022 globalfastener.com (Internet Archive copy, 2026-10-25 9aa6930a2aa3 captured 2026-03-16)
fuller-iso4014 Fuller Fasteners 2026-10-25 1130347fbf24 engineersedge-iso4014-4017 Engineers Edge 2026-10-25 1466bfae2ba8
The whole series (verification map, corrections, drawings): CC-ISO4014-Ds.
ISO 4014:2022 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Page 2/2 Hex head bolt - M4 - both detail levels - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec e05c8289049003c09e32d8bd4ae913179e09a28c
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.