ISO 4026 hexagon socket set screw, flat point, M4
Size drawing - M4 values on the views - | = 5 shown - enlarged 10:1
Thread pitch
d1 = 3.2422 View on the socket end 2.05 i Socket across flats 2.02-2.08
a <= 50° (CH)
2 2.303 Socket across corners
Socket depth, short lengths
Socket depth, other lengths . |= 5 shown $ = 2.05 lengths 4-20 2.02-2.08 or 2.375 - - - - - Flat point diameter 2.25-2.50 < 50
Point chamfer to axis, deg
Basic minor diameter (end face)
B s 50° (ISO 4753 FL)
e = 2.303 Tap drill (method d - P) 1
Socket-end chamfer angle, deg
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L2 6 - L117.
Notes
Short lengths (sheet DO1) take the 'short' t.
TITLE
'? CommunityCAD Size drawing, M4
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 4026:2003 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Set screw, flat point - M4
SHEET REV SCALE PROJECTION UNITS CC-1S04026-SZ-M4 A 10:1 € Dimensions in mm
SPEC VERSION LICENSE PAGE cfd05b053c736a4F15ba3030aa41febd40cdc205 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
