ISO 4027 hexagon socket set screw, cone point, M4
Size drawing - M4 values on the views - | = 6 shown - enlarged 10:1
Thread pitch
7 Socket across flats ads di = 3.2422 2.02-2.08
} a = 50° (CH) 1 2 2.303 Socket across corners
View on thd socket end
Socket depth, short lengths
Socket depth, other lengths
|= 6 shown 8 = 2,051. Cone flat diameter
lengths 4-20
\ Cone angle (included), deg
Basic minor diameter (end face)
at Cone angle, short lengths, deg e = 2.303 i 1
Vv = 90° included (ISO 4753 TC)
Tap drill (method d - P)
Socket-end chamfer angle, deg
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L2 6 - L117.
Notes
Short lengths (sheet DO1) take the 'short' t and the cone angle.
TITLE
'? CommunityCAD Size drawing, M4
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 4027:2003 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Set screw, cone point - M4
SHEET REV SCALE PROJECTION UNITS CC-1S804027-SZ-M4 A 10:1 € Dimensions in mm
SPEC VERSION LICENSE PAGE 82d0e3f1e4052a4ec559d0F9Fd7b4cF7b5772671 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.