ISO 7380-1 hexagon socket button head screw, M4
Size drawing - M4 values on the views - | = 12 shown - enlarged 5:1
Source levels Main value = the modeled value (nominal, else the middle of min-max). Thread pitch . Grey under a value = its min-max, where the source gives both. 7.42 </ 2 = the source gives only that limit, modeled at 7.24-7.68 it. ref = reference.
Head diameter
View fro 2.075 L2 = the standard itself (or its complete free Head height preview, or the maker's drawing).
. 1.95-2.20
rf = 4.40 (dome, on the axis) L1 = two or more independent sources agree: the
4.20-4.60 58 net Flat top diameter . release gate.
7\\ LO = one source only: printed amber and marked = t2130 [/ « { k = 2.075 { s = 2.550 Dome radius 4-40
t 195-226 | w = 0.30 2.520..2.580 - 4.20-4.60 c= 2 owes value was corrected; the datasheet says how. Socket across flats 2.558 House convention = a detail no source 2-520-2.580 dimensions, drawn to a stated house rule. > 2.873 This size's values: L2 16 - L16. rs 2 0.20, da s 4.7 Socket across corners Notes s: the nominal is the key size; the socket is Socket depth Doe modeled at the middle of its band.
|= 12 shown
lengths 6-40 Wall under socket 9.30
Underhead fillet, part thread 8/20
= 50° (ISO 4753 CH) - Underhead fillet, full thread
Shank diameter
d1 = 3.242
Transition diameter
Bearing face diameter
Thread length
Basic minor diameter (end face)
Tap drill (method d - P)
End chamfer angle, deg
TITLE
'? CommunityCAD Size drawing, M4
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 7380-1:2011 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Button head screw - M4
SHEET REV SCALE PROJECTION UNITS CC-1S07380-SZ-M4 A 5:11 € Dimensions in mm SPEC VERSION LICENSE PAGE 82d0e3F1e4052a4ec559d0F9Fd7b4cF7b5772671 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.