M3x5.7 Heat-set Insert (Threaded Insert For Printed Parts), Heat-set threaded insert

The M3x5.7 heat-set insert (Heat-set threaded insert): length 5.7 mm, knurl outside diameter 4.6 mm, pilot diameter 3.9 mm. Available as simplified and threaded STEP files.

How these parts are made, and what the levels mean: read the method

• Also searched as: M3x5.7 insert
• Model id: heat-set-inserts-m3x5-7
• Standard: Heat-set threaded insert · size M3x5.7

Files

Part key	Simplified	Threaded
heat-set-inserts-m3x5-7	STEP	STEP

Dimensions

Symbol	Name	min	nom	max	Modeled	Rule	Level
L	Length		5.7		5.7	nominal	L1
d1	Knurl outside diameter		4.6		4.6	nominal	L1
d2	Pilot diameter		3.9		3.9	nominal	L0 (nom: one source)

Drawing

As a PDF: CC-HSINSERT-SZ-M3x5.7.pdf.

What each maker states

• Recommended hole, per maker: CNC Kitchen 4.0 mm, RS PRO 4.0 mm, ruthex 4.0 mm.
• Wall around the hole, per maker: CNC Kitchen 1.6 mm, RS PRO 1.6 mm, ruthex 1.6 mm.
• Minimum hole depth, per maker: CNC Kitchen 6.7 mm, ruthex 6.7 mm.
• The hole depth is each maker's callout on its drawing added to that maker's L, read twice by Claude, and the two reads agree.
• CNC Kitchen's values for this size are figure reads: its table is an image, read twice by Claude, and the two reads agree.

The M3x5.7 heat-set insert beside the M3x5x4 and the M4x4

The M3x5.7 is number 8, counting from the smallest, of the 15 Heat-set threaded insert heat-set inserts published here, from M2x3 to M8x12.7.

• Length (L): 5.7 mm on the M3x5.7 heat-set insert, against 4 mm on the M3x5x4 and 4 mm on the M4x4.
• Knurl outside diameter (d1): 4.6 mm on the M3x5.7 heat-set insert, against 5 mm on the M3x5x4 and 6.3 mm on the M4x4.
• Pilot diameter (d2): 3.9 mm on the M3x5.7 heat-set insert, against 4.25 mm on the M3x5x4 and 5.5 mm on the M4x4.

Other sizes

• One size smaller: M3x5x4 Heat-set Insert (Threaded Insert For Printed Parts), Heat-set threaded insert.
• One size larger: M4x4 Heat-set Insert (Threaded Insert For Printed Parts), Heat-set threaded insert.

Documents

• CC-HSINSERT-DS-M3x5.7.pdf: M3x5.7 datasheet: values with levels, sources
• CC-HSINSERT-SZ-M3x5.7.pdf: M3x5.7 drawing: this size's values on the views
• parts.json: the part record of this size (the platform contract)

Sources

cnckitchen-inserts, rspro-inserts, ruthex-inserts. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.