CC-DIN976-1-DS-M3 revA Size datasheet - M3
'?) CommunityCAD
DIN 976-1 M3 threaded rod, type A, 1 m (DIN 975)
Size datasheet: this size's values with their levels, its part, conventions and sources.
Diameter d= 3mm, modeled at nominal Thread M3 x 0.5, ISO 261 coarse (metadata only) Length |= 1000 mm Files 1 STEP AP214 (one detail level) M3 x 1000, front view, 2.5:1, broken Sym. Dimension Value Level P Pitch, coarse thread (ISO 261) 0.5 1-2 di Minor diameter, basic (ISO 68-1) 2.4587 1-2 1 Rod length, nominal 1000 L1- 2 m Mass per 1000 rods, kg (steel) 44 L1- 2
Modeled value: nominal, else the midpoint of min-max. P and d1: the thread, not modeled on the rod. m: mass per 1000 rods, a cross-check. * amber: one source (LO). Level - independent sources.
DIN 976-1:2016-09 type A (DIN 975) - ISO 261, ISO 68-1 (coarse thread) Page 1/2 Threaded rod - M3 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec e05c8289049003c09e32d8bd4ae913179e09a28c
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
. CC-DIN976-1-DS-M3 revA '?) CommunityCAD Size datasheet - M3
Lengths
| Thread Part key
1000 built - - din975-976-a-m3x1000
One STEP file per size: the 1 m rod, one detail level.
Conventions
« DIN 976-1:2016-09 type A; DIN 975 is the familiar name. « Simplified only: a cylinder at nominal d; the thread is metadata (ADR 0075 row 10). ¢ Type A ends: flat, square, no chamfer, sharp edges. No markings; | nominal.
Sources Source Publisher Retrieved sha256 wikipedia-iso261 Wikipedia 2026-10-23 66b9F05884bb amesweb-tap-drill AMESweb 2026-10-23 e6501cc1414a rule-basic-minor CommunityCAD 2026-10-23 00329692204 fasteners-eu-din975 fasteners.eu 2026-10-26 9daQedafa750 fasten-it-din975 fasten.it 2026-10-26 faflf6b491F4
The whole series (verification map, drawings): CC-DIN976-1-DS.
DIN 976-1:2016-09 type A (DIN 975) - ISO 261, ISO 68-1 (coarse thread) Page 2/2 Threaded rod - M3 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec e05c8289049003c09e32d8bd4ae913179e09a28c
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.