ISO 4035 hexagon thin nut (style 0), M3
Size drawing - M3 values on the views - enlarged 10:1
Sym. Dimensi
Thread pitch
5.41 5.32-5.50
Width across flats
2 6.01 Width across corners
1.675 1.55-1.80
Nut height
> Wrenching height 2 1.26
6 = 115° 4.60 110°-120 Bearing face diameter .
3.225 3.00-3.45
Countersink diameter
22.5 15-30
Corner chamfer angle, deg
115 110-120
Countersink angle, deg
Basic minor diameter (crests) DoS
tap Tap drill (method D - P)
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule.
This size's values: L2 10 - L16.
Notes
s: the nominal is the wrench size (= s max); modeled at the middle of its band (ADR 0014). e is not modeled on its own: the regular hexagon gives e = 2s/v3 from the modeled s, = e min.
dw min sets the corner chamfer's face circle, (dw min + s) / 2; mw min is checked at mid-flat. No washer face: ISO 4035 has no washer face form, so there is no c (ADR 0040 row 5).
e2
View fro TITLE
'? CommunityCAD Size drawing, M3
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 4035:2012 - ISO 68-1/ ISO 261 (thread) Hexagon nut - M3
SHEET REV SCALE PROJECTION UNITS CC-1S04035-SZ-M3 A 10:1 € Dimensions in mm
SPEC VERSION LICENSE PAGE 82d0e3f1e4052a4ec559d0F9Fd7b4cF7b5772671 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.