M3 Small Flat Washer, ISO 7092 size drawing (PDF)

Datasheet — M3 Small Flat Washer, ISO 7092 by Milo

Open the PDF
M3 Small Flat Washer, ISO 7092Get the CAD modelM3 Small Flat Washer, ISO 7092CC-ISO7092-SZ-M3.pdf

Text of this datasheet

ISO 7092 plain washer, small series, grade A, M3

Size drawing - M3 values on the views - enlarged 10:1

Dimension

3.20 3.20-3.38

Hole diameter (nom = min)

6.0 5.7-6.0

Outside diameter (nom = max)

0.5 0.45-0.55

Thickness

Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both.

h=0.5 < / = = the source gives only that limit, modeled at it. ref = reference. 0.45-0.55

L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate.

LO = one source only: printed amber and marked *.

c = a source value was corrected; the datasheet says how.

House convention = a detail no source dimensions, drawn to a stated house rule.

This size's values: L2 3.

Notes

d1 nom = d1 min and d2 nom = d2 max (the standard's own convention); h nom lies in its band.

Edges are sharp, walls square to the faces: house conventions, sheet DO2.

View from above

TITLE

'? CommunityCAD Size drawing, M3

STANDARDS FOLLOWED FAMILY / DETAIL

ISO 7092:2000 Plain washer, small series - M3

SHEET REV SCALE PROJECTION UNITS CC-1S07092-SZ-M3 A 10:1 € Dimensions in mm SPEC VERSION LICENSE PAGE cfd05b053c736a4F15ba3030aa41febd40cdc205 CC-BY 4.0 IronPixel Labs LLC 1/1

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.