PCB standoff, metric hex, M3 AF 5
Size drawing - M3 AF 5 values on the views - | = 17 shown, male/female - enlarged 5:1
Sym. | Dimensio
Width across flats
Body length (shown; every length on DO2)
Female thread depth, smallest stated
Male stud length
Thread pitch 30° chamfer, illustrative
|= 17 shown s=5 Drill point's diameter at t lengths 4-60 4.8-5.0
d1 Stud end face (ISO 4753 CH)
es
End view Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both. < / = = the source gives only that limit, modeled at it. ref = reference. L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. Notes
No published standard: L1 = two makers agree (ADR 0034).
t: the smallest depth any maker states or guarantees for the shape; b: the stud two makers state, else the shortest (#1116 item 3, #1207). Both vary with I: see DO2. Illustrative (house rule): 30° corner chamfers to a circle of s, the 118° drill
point starting at t, the 90° countersink to D (#1116, #1207). Not from any maker. Shown in brass: the house's illustrative finish; makers sell several materials.
Side view
TITLE
'? CommunityCAD Size drawing, M3 AF 5
STANDARDS FOLLOWED FAMILY / DETAIL
No published standard - Ettinger, Keystone, Harwin (ADR 0034) PCB standoff - hex - metric - M3 AF 5 SHEET REV SCALE PROJECTION UNITS CC-STANDOFF-SZ-M3-s5 A 5:11 € Dimensions in mm SPEC VERSION LICENSE PAGE
70b2bf787ea8F07904ce030afSObcaf231F0c68F CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.