M3 Nylon Insert Lock Nut, ISO 10511 size drawing (PDF)

Datasheet — M3 Nylon Insert Lock Nut, ISO 10511 by Milo

Open the PDF
M3 Nylon Insert Lock Nut, ISO 10511Get the CAD modelM3 Nylon Insert Lock Nut, ISO 10511CC-ISO10511-SZ-M3.pdf

Text of this datasheet

ISO 10511 nylon insert lock nut (thin, non-metallic insert), M3

Size drawing - M3 values on the views - enlarged 10:1

Sym. Dimensi

Thread pitch

5.41 5.32-5.50

Width across flats

2 6.01 Width across corners

Hexagon height oes

3.66 3.42-3.90

Nut height (to the collar top)

> Wrenching height B dock

2 4.56 Bearing face diameter

1

da = 3.225 en 3.225 ~ Countersink diameter

3.00-3.45 30-38

22.5 15-30

Corner chamfer angle, deg

105

Countersink angle, deg 90-120

2.4587

Basic minor diameter (crests)

tap Tap drill (method D - P) 2.8

Source levels

Main value = the modeled value (nominal, else the middle of min-max).

Grey under a value = its min-max, where the source gives both.

< / = = the source gives only that limit, modeled at it. ref = reference.

L2 = the standard itself (or its complete free preview, or the maker's drawing).

L1 = two or more independent sources agree: the release gate.

LO = one source only: printed amber and marked *.

c = a source value was corrected; the datasheet says how.

House convention = a detail no source dimensions, drawn to a stated house rule.

This size's values: L2 11-L16.

Notes

s: modeled at the middle of its s min-max band (ADR 0014). m is modeled at m min.

e is not modeled on its own: the regular hexagon gives e = 2s/v3 from the modeled s, = e min. dw min sets the corner chamfer's face circle, (dw min + s) / 2; mw min is checked at mid-flat. No washer face (ISO 10511 has none, so no c). Countersink on the bearing face only (ADR 0047).

s=5.41 §.32-5.50

TITLE

'? CommunityCAD Size drawing, M3

STANDARDS FOLLOWED FAMILY / DETAIL

ISO 10511:2012 (withdrawn) - ISO 68-1 / ISO 261 (thread) Lock nut - M3

View from above SHEET REV SCALE PROJECTION UNITS CC-1S010511-SZ-M3 A 10:1 € Dimensions in mm

SPEC VERSION LICENSE PAGE cfd05b053c736a4F15ba3030aa41febd40cdc205 CC-BY 4.0 IronPixel Labs LLC 1/1

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.