M3 Hex Head Screw, ISO 4017 size drawing (PDF)

Datasheet — M3 Hex Head Screw, ISO 4017 by Milo

Open the PDF
M3 Hex Head Screw, ISO 4017Get the CAD modelM3 Hex Head Screw, ISO 4017CC-ISO4017-SZ-M3.pdf

Text of this datasheet

ISO 4017 hexagon head screw, M3

Size drawing - M3 values on the views - | = 20 shown - enlarged 5:1

Sym. Dimensi

Thread pitch

5.41 5.32-5.50

Width across flats

> Width across corners > 6.01

k=2 c=0.275

1.875-2.125 0.15-0.40 Head height 2

a= 1.00 1.875-2.125 0.50-1.50

> Wrenching height 21.31

0.275 Washer face height r2 0.10, da < 3.6 g 0.15-0.40

> Bearing face diameter 2 4.84c

Head top chamfer, deg

| = 20 shown Underhead fillet radius lengths 6-30

Transition diameter

1.00 6.50-1.50

Thread run-out under head

Basic minor diameter (end face) 2.4587

= 50° (ISO 4753 CH) Tap drill (method d - P)

End chamfer angle, deg

Source levels

d1 = 2.4587 Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both. < / = = the source gives only that limit, modeled at it. ref = reference. View from above L2 = the standard itself (or its complete free preview, or the maker's drawing).

L1 = two or more independent sources agree: the release gate. LO = one source only: printed amber and marked *. c = a source value was corrected; the datasheet says how.

House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L2 15 - L16. s=5.41 Notes 5.32-5.50 . . - - s: modeled at the middle of its band; e and kw are checks, not modeled.

TITLE

'? CommunityCAD Size drawing, M3

STANDARDS FOLLOWED FAMILY / DETAIL

ISO 4017:2022 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Hex head screw - M3

SHEET REV SCALE PROJECTION UNITS CC-1S04017-SZ-M3 A 5:1 € Dimensions in mm

SPEC VERSION LICENSE PAGE cfd05b053c736a4F15ba3030aa41febd40cdc205 CC-BY 4.0 IronPixel Labs LLC 1/1

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.