ISO 4017 hexagon head screw, M3
Size drawing - M3 values on the views - | = 20 shown - enlarged 5:1
Sym. Dimensi
Thread pitch
Width across flats So
5.32-5.50 > Width across corners > 6.01
k=2 1.875-2.125 =0. Head height 2
a= 1.00 1.875-2.125 0.50-1.50
> Wrenching height 21.31
0.275 Washer face height r2 0.10, da < 3.6 g 0.15-0.40
> Bearing face diameter 2 4.84c
Head top chamfer, deg
| = 20 shown Underhead fillet radius lengths 6-30
Transition diameter
d=M3 Thread run-out under head 1.00 @.50-1.50 Basic minor diameter (end face) 2.4587 Tap drill (method d - P) . < 50° (ISO 4753 CH) ° End chamfer angle, deg
dt 4587 Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both. < / = = the source gives only that limit, modeled at it. ref = reference. L2 = the standard itself (or its complete free preview, or the maker's drawing). View frol L1 = two or more independent sources agree: the release gate. LO = one source only: printed amber and marked *. c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L2 15 - L16. Notes
s= 5.41 - - s: modeled at the middle of its band; e and kw are checks, not modeled.
TITLE
e2 6.01 '? CommunityCAD Size drawing, M3
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 4017:2022 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Hex head screw - M3
SHEET REV SCALE PROJECTION UNITS CC-1S04017-SZ-M3 A 5:1 € Dimensions in mm
SPEC VERSION LICENSE PAGE €05¢8289049003c09e32d8bd4ae913179e09a28c CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.