ISO 4014 hexagon head bolt, M3
Size drawing - M3 values on the views - | = 20 shown - enlarged 2:1
Source levels Sym. | Dimensi Main value = the modeled value (nominal, else the middle of min-max). Thread pitch . Grey under a value = its min-max, where the source gives both. 5.41 </ = = the source gives only that limit, modeled at View from above 5.32-5.50 it. ref = reference. | L2 = the standard itself (or its complete free k=2 Width across corners 2 6.01 preview, or the maker's drawing). __ tf 1.875-2.125 . . L1 = two or more independent sources agree: the : 2 release gate. Head height 1 875-2.198 LO = one source only: printed amber and marked * Ig < 8.0, Is = 5.5 r 20.10, da = 3.6 : c = a source value was corrected; the datasheet 21.31 says how. House convention = a detail no source dimensions,
Width across flats
Wrenching height
Is 20 shown drawn to a stated house rule. igths 20-30 0.275 Washer face height This size's values: L2 15 - L16. 6.15-0.40 b = 12 ref Notes . . 2 4.84c s: modeled at the middle of its band; e and kw are Bearing face diameter
= 50° (ISO 4753 CH) checks, not modeled.
Head top chamfer, deg
d1 = 2.4587
Underhead fillet radius
Transition diameter
2.93 2.86-3.00
Shank diameter
12 ref
Thread length
Transition length
Basic minor diameter (end face)
Tap drill (method d - P)
End chamfer angle, deg
TITLE
'? CommunityCAD Size drawing, M3
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 4014:2022 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Hex head bolt - M3
SHEET REV SCALE PROJECTION UNITS CC-1804014-SZ-M3 A 2:1 € Dimensions in mm SPEC VERSION LICENSE PAGE
cfd05b053c736a4F15ba3030aa41Febd40cdc205 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
