M3 Flat Point Set Screw, ISO 4026 size drawing (PDF)

Datasheet — M3 Flat Point Set Screw, ISO 4026 by Milo

Open the PDF
M3 Flat Point Set Screw, ISO 4026Get the CAD modelM3 Flat Point Set Screw, ISO 4026CC-ISO4026-SZ-M3.pdf

Text of this datasheet

ISO 4026 hexagon socket set screw, flat point, M3

Size drawing - M3 values on the views - | = 4 shown - enlarged 10:1

Sym. Dimensi

Thread pitch

d1 = 2.4587 View on the socket end 1.55 Socket across flats 1.52-1.58

a <= 50° (CH)

2 1.733 Socket across corners

Socket depth, short lengths

|= 4 shown Socket depth, other lengths lengths 3-16

1.875 1.75-2.00

Flat point diameter

5 i < 50 Point chamfer to axis, deg

B s 50° (ISO 4753 FL)

Basic minor diameter (end face)

dp = 1.875 1.75-2.00

Tap drill (method d - P)

Socket-end chamfer angle, deg

Source levels

Main value = the modeled value (nominal, else the middle of min-max).

Grey under a value = its min-max, where the source gives both.

< / = = the source gives only that limit, modeled at it. ref = reference.

L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate.

LO = one source only: printed amber and marked *.

c = a source value was corrected; the datasheet says how.

House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L2 6 - L117.

Notes

Short lengths (sheet DO1) take the 'short' t.

TITLE

'? CommunityCAD Size drawing, M3

STANDARDS FOLLOWED FAMILY / DETAIL

ISO 4026:2003 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Set screw, flat point - M3

SHEET REV SCALE PROJECTION UNITS CC-1S804026-SZ-M3 A 10:1 € Dimensions in mm

SPEC VERSION LICENSE PAGE

cfd05b053c736a4F15ba3030aa41Febd40cdc205 CC-BY 4.0 IronPixel Labs LLC 1/1

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.