M3 Flat Point Set Screw, ISO 4026 datasheet (PDF)

Datasheet — M3 Flat Point Set Screw, ISO 4026 by Milo

Open the PDF
M3 Flat Point Set Screw, ISO 4026Get the CAD modelM3 Flat Point Set Screw, ISO 4026CC-ISO4026-DS-M3.pdf

Text of this datasheet

'?) CommunityCAD

CC-1S04026-DS-M3 revA Size datasheet - M3

ISO 4026 M3 hexagon socket set screw, flat point

Size datasheet: this size's values with their levels, its lengths, conventions and sources.

Thread

Lengths Files

Simplified - M3x10, front view, 5:1 Threaded - M3x10, front view, 5:1

Sym. Dimension

P Thread pitch

s Socket across flats

e Socket across corners

t Socket depth, short lengths

t Socket depth, other lengths

dp Flat point diameter

B Point chamfer to axis, deg

d1 Basic minor diameter (end face) tap Tap drill (method d - P)

a Socket-end chamfer angle, deg

Modeled value: nominal, else the midpoint of min-max. < / value was corrected. Level - independent sources.

ISO 4026:2003 - ISO 4753:2011 (ends) - ISO 68-1 / ISO 261 (thread) Set screw, flat point - M3 - both detail levels - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.

M3 x 0.5, ISO metric coarse, right hand

8 generated, | = 3-16

16 STEP AP214 (simplified + threaded)

Value 0.5 L1 - 1.55 La - 2 1.52-1.58 2 1.733 1-3 21.2 l1- 3 >2 L1 +3 1.875 l1 +2 1.75-2.00 < 50 2-1 2.4587 l1 + 2 2.5 L1- 2 < 50 L2+1

: only that limit is given, modeled at the limit. * amber: one source (LO). c: a source

Page 1/2

spec cfd05b053c736a4f15ba3030aa41Febd40cdc205

---

CC-1S04026-DS-M3 revA Size datasheet - M3

'?) CommunityCAD

Lengths | Thread t dp Part key 3 full, short 21.2 1.875 is04026-m3x3 4 full, long 22 1.875 iso4026-m3x4 5 full, long 22 1.875 iso4026-m3x5 6 full, long 22 1.875 is04026-m3x6 8 full, long 22 1.875 is04026-m3x8 10 full, long >2 1.875 is04026-m3x10 12 full, long 22 1.875 iso4026-m3x12 16 full, long 22 1.875 iso4026-m3x16

Fully threaded. t = the socket depth modeled (t min, short or long by length). Which lengths are short has one source (LO, #584 item 4).

Conventions

« Socket end: ISO 4753 chamfered end (CH), end face at d1, chamfer at the angle limit.

* Socket: regular hexagon at the modeled s, sharp corners, one corner on +X, flat floor at t min.

« Flat point: ISO 4753 FL, a chamfer at the angle limit to the axis down to the flat dp (midpoint).

¢ Thread (threaded level): ISO 68-1 basic profile, the full length, cut by both ends.

« Values given only as a limit are modeled at that limit. Features the standard does not dimension are house conventions.

Sources

Source Publisher Retrieved sha256 amesweb-tap-drill AMESweb 2026-10-23 e6501cc1414a pule-tap-drill CommunityCAD 2026-10-23 625b582c306e pule-basic-minor CommunityCAD 2026-10-23 00329692204 iso4753-2011-sample ISO (preview published by iTeh Standards) n/a 7526d25F9381 (kept outside the repo) fuller-iso4026 Fuller Fasteners 2026-10-25 49ba2edb36b7 fuller-iso4027 Fuller Fasteners 2026-10-25 03523ae5e142 fuller-iso4028 Fuller Fasteners 2026-10-25 Of0a658d8693 fuller-iso4029 Fuller Fasteners 2026-10-25 d420eSe6b5F8 fasten-it-is04026 fasten.it 2026-10-25 e111077c7750 fasten-it-iso4027 fasten.it 2026-10-25 4e60ee0a98b6 fasten-it-is04028 fasten.it 2026-10-25 b1f3ca7c19bé fasten-it-iso04029 fasten.it 2026-10-25 198cb790d686 amesweb-is04026-4029 AMESweb 2026-10-25 0643acf2a4F2

The whole series (verification map, corrections, drawings): CC-ISO4026-DS.

ISO 4026:2003 - ISO 4753:2011 (ends) - ISO 68-1 / ISO 261 (thread) Page 2/2 Set screw, flat point - M3 - both detail levels - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec cfd05b053c736a4f15ba3030aa41f ebd40cdc205

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.