ISO 4026 hexagon socket set screw, flat point, M3
Size drawing - M3 values on the views - | = 4 shown - enlarged 10:1
Sym. Dimensi
Thread pitch
d1 = 2.4587 Socket across flats DoS
1.52-1.58 a = 50° (CH (CH) 1 2 1.733 Socket across corners
View on the socket end
1 Socket depth, short lengths
|= 4 shown Socket depth, other lengths lengths 3-16
1.875 1.75-2.00
Flat point diameter
5 i < 50 Point chamfer to axis, deg
B s 50° (ISO 4753 FL)
Basic minor diameter (end face)
Tap drill (method d - P)
Socket-end chamfer angle, deg
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L2 6 - L117.
Notes
Short lengths (sheet DO1) take the 'short' t.
TITLE
'? CommunityCAD Size drawing, M3
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 4026:2003 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Set screw, flat point - M3
SHEET REV SCALE PROJECTION UNITS CC-1S804026-SZ-M3 A 10:1 € Dimensions in mm
SPEC VERSION LICENSE PAGE
82d0e3f1e4052a4ecS59d0F9Fd7b4cF7b5772671 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.