M3 Button Head Screw, ISO 7380-1 size drawing (PDF)

Datasheet — M3 Button Head Screw, ISO 7380-1 by Milo

Open the PDF
M3 Button Head Screw, ISO 7380-1Get the CAD modelM3 Button Head Screw, ISO 7380-1CC-ISO7380-SZ-M3.pdf

Text of this datasheet

ISO 7380-1 hexagon socket button head screw, M3

Size drawing - M3 values on the views - | = 8 shown - enlarged 5:1

Source levels Main value = the modeled value (nominal, else the middle of min-max). Thread pitch . Grey under a value = its min-max, where the source gives both. View from above Head diameter 5.55 </ 2 = the source gives only that limit, modeled at 5.40-5.70 it. ref = reference. ; 1.525 L2 = the standard itself (or its complete free Head height preview, or the maker's drawing). . 1.40-1.65 rf = 3.50 (dome, on the axis) L1 = two or more independent sources agree: the

3.30-3.70 — Flat top diameter 2.6 ref release gate. s = 2.050

2.020-2.080 , 3.50 Dome radius 3.30-3.70 c = a source value was corrected; the datasheet says how. Socket across flats 2.058 House convention = a detail no source 2-020-2.080 dimensions, drawn to a stated house rule.

rs 2 0.10, da < 3.6 > 2.303 This size's values: L2 16 - L16. l= 8 shown Socket across corners Notes

lengths 6-16 s: the nominal is the key size; the socket is Socket depth Doth modeled at the middle of its band.

LO = one source only: printed amber and marked *

< 50° (ISO 4753 CH) 0.20

Wall under socket

Underhead fillet, part thread 8.10

ial = 2.4587

Underhead fillet, full thread

Shank diameter

Transition diameter

Bearing face diameter

Thread length

Basic minor diameter (end face)

Tap drill (method d - P)

End chamfer angle, deg

TITLE

'? CommunityCAD Size drawing, M3

STANDARDS FOLLOWED FAMILY / DETAIL

ISO 7380-1:2011 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Button head screw - M3

SHEET REV SCALE PROJECTION UNITS CC-1S07380-SZ-M3 A 5:11 € Dimensions in mm SPEC VERSION LICENSE PAGE cfd05b053c736a4F15ba3030aa41febd40cdc205 CC-BY 4.0 IronPixel Labs LLC 1/1

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.