Heat-set threaded insert, per thread and length, M2x4
Size drawing - M2x4 values on the views - enlarged 8:1 Dimension Length
di Knurl outside diameter
d2 Pilot diameter
Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both. ~ ~ < / = = the source gives only that limit, modeled at it. ref = reference. L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate. LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. @d1 = 3.6* This size's values: LO 3. @d2 = 3.1* Notes
1 No published standard: values from the makers' tables (ADR 0034). Knurl, groove, lead and pilot proportions are illustrative: sheet DO2.
TITLE
'? CommunityCAD Size drawing, M2x4
STANDARDS FOLLOWED FAMILY / DETAIL
No published standard (makers' tables) Heat-set threaded insert - M2x4 SHEET REV SCALE PROJECTION UNITS CC-HSINSERT-SZ-M2x4 A 8:1 € Dimensions in mm SPEC VERSION LICENSE PAGE 1431dca0786db211c4968b488128bf6d30bccSdb CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.