DIN 562 thin square nut, M2.5
Size drawing - M2.5 values on the views - enlarged 10:1
Sym. Dimensi
Thread pitch (coarse)
Width across flats
Width across corners
Nut height
D1 Basic minor diameter (crests)
tap Tap drill (method D - P)
Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both. < / = = the source gives only that limit, modeled at it. ref = reference. L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate. LO = one source only: printed amber and marked *. c = a source value was corrected; the datasheet says how. House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L2 1-L19. Notes
s, m: the nominal is the max; modeled at the middle of the band (ADR 0014). e >6.3 s min and m min are the makers' band, the widest stated (ADR 0071, owner, #804). . ' . e is not modeled on its own: the sharp square gives e = s-V2 from the modeled s, checked. View from aboye (either face) . .
Both faces plain and sharp: no chamfer, no countersink (ADR 0079).
TITLE
'? CommunityCAD Size drawing, M2.5
STANDARDS FOLLOWED FAMILY / DETAIL
DIN 562:2013-05 - ISO 68-1/ ISO 261 (thread) Thin square nut - M2.5
SHEET REV SCALE PROJECTION UNITS CC-DIN562-SZ-M2.5 A 10:1 € Dimensions in mm
SPEC VERSION LICENSE PAGE 82d0e3f1e4052a4ec559d0F9Fd7b4cF7b5772671 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.