ISO 4035 hexagon thin nut (style 0), M2.5
Size drawing - M2.5 values on the views - enlarged 10:1
Sym. Dimensi
Thread pitch 8.45
4.91 4.82-5.00
Width across flats
25.45 Width across corners
1.475 1.35-1.60
Nut height
> Wrenching height 2 1.18
@ = 115° 10°-120) Bearing face diameter
2.70 2.50-2.90
Countersink diameter
22.5 15-30
Corner chamfer angle, deg
115 110-120
Countersink angle, deg
Basic minor diameter (crests) Bol?
tap Tap drill (method D - P) 2705
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule.
s= 4.91 This size's values: L2 10 -L16.
4.82-5.00 Notes
s: the nominal is the wrench size (= s max); modeled at the middle of its band (ADR 0014).
e is not modeled on its own: the regular hexagon gives e = 2s/v3 from the modeled s, = e min. dw min sets the corner chamfer's face circle, (dw min + s) / 2; mw min is checked at mid-flat. No washer face: ISO 4035 has no washer face form, so there is no c (ADR 0040 row 5).
e= 5.45
View fro
TITLE
'? CommunityCAD Size drawing, M2.5
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 4035:2012 - ISO 68-1/ ISO 261 (thread) Hexagon nut - M2.5
SHEET REV SCALE PROJECTION UNITS CC-1S04035-SZ-M2.5 A 10:1 € Dimensions in mm SPEC VERSION LICENSE PAGE 82d0e3F1e4052a4ec559d0F9Fd7b4cF7b5772671 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.