ISO 4762 hexagon socket head cap screw, M2.5
Size drawing - M2.5 values on the views - | = 8 shown: enlarged 10:1
Source levels Main value = the modeled value (nominal, else the middle of min-max). Thread pitch 8.45 Grey under a value = its min-max, where the source gives both. 4.41 < / = = the source gives only that limit, modeled at it. Head diameter, plain APA ref = reference. L2 = the standard itself (or its complete free preview,
Head diameter, knurled
1
< 4.68 or the maker's drawing). | L1 = two or more independent sources agree: the 1
dk = 4.41 2.43c release gate.
4.32-4.50 Head height Ara LO = one source only: printed amber and marked *. ' 136-2.
c = a source value was corrected; the datasheet says 2.05 how. 2.02-2.08 House convention = a detail no source dimensions,
Socket across flats
1 View from above
> 2.303 drawn to a stated house rule.
k=? 436 Socket across corners This size's values: L2 1- L119 - LO 2.
2.36-2.50 Notes
> 1.1 s: the nominal is the key size; the socket is modeled at the middle of its band.
Socket depth
s=2.05 2.02-2.08
Wall under socket
Head top chamfer
Q.2* 0.1-0.3
Underhead fillet radius
r=0.2* das 31
r0.1-0.3
. Shank diameter 2.43
| = 8 shown 2.36-2.50 lengths 4-25
< Transition diameter S Soil
Bearing face diameter
= 50° (ISO 4753 CH)
Thread length
Basic minor diameter (end face)
Tap drill (method d - P)
End chamfer angle, deg
TITLE
'? CommunityCAD Size drawing, M2.5
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 4762:2004 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Socket head cap screw - M2.5
SHEET REV SCALE PROJECTION UNITS CC-1804762-SZ-M2.5 A 10:1 € Dimensions in mm SPEC VERSION LICENSE PAGE 54d2547caedeObédef71904216be1e6990995d2a CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.