M2.5 Hex Head Screw, ISO 4017 size drawing (PDF)

Datasheet — M2.5 Hex Head Screw, ISO 4017 by Milo

Open the PDF
M2.5 Hex Head Screw, ISO 4017Get the CAD modelM2.5 Hex Head Screw, ISO 4017CC-ISO4017-SZ-M2.5.pdf

Text of this datasheet

ISO 4017 hexagon head screw, M2.5

Size drawing - M2.5 values on the views - | = 20 shown: enlarged 5:1

Sym. Dimensi Thread pitch

4.91 4.82-5.00

= 22.5° > 5.45

15°-30° Width across corners ~

k =1.7 c= 0.175 1.575-1.825 0.10-0.25 1.7

a=0.90 Head height 0.45-1.35

Width across flats

1.575-1.825

> Wrenching height 21.10

0.175

r 20.10, das 3.1 Washer face height ' 0.10-0.25

> Bearing face diameter 2 4.340

Head top chamfer, deg

| = 20 shown Underhead fillet radius lengths 5-25

Transition diameter

0.90 0.45-1.35

Thread run-out under head

Basic minor diameter (end face) 2.0129

= 50° (ISO 4753 CH) Tap drill (method d - P)

End chamfer angle, deg

ae

d1 = 2.0129

Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both. . < / = = the source gives only that limit, modeled at it. ref = reference. View from above . . . 1 . L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate. LO = one source only: printed amber and marked *. c = a source value was corrected; the datasheet says how. House convention = a detail no source dimensions, drawn to a stated house rule. s = 4.91 This size's values: L2 15 - L16. 4.82-5.00 Notes

ly s: modeled at the middle of its band; e and kw are checks, not modeled. TITLE

'? CommunityCAD Size drawing, M2.5

STANDARDS FOLLOWED FAMILY / DETAIL

ISO 4017:2022 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Hex head screw - M2.5

SHEET REV SCALE PROJECTION UNITS CC-1804017-SZ-M2.5 A 5:11 € Dimensions in mm SPEC VERSION LICENSE PAGE

cfd05b053c736a4F15ba3030aa41Febd40cdc205 CC-BY 4.0 IronPixel Labs LLC 1/1

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.