ISO 4014 hexagon head bolt, M2.5
Size drawing - M2.5 values on the views - | = 16 shown - enlarged 5:1
Source levels Sym. | Dimensi Main value = the modeled value (nominal, else the middle of min-max). Thread pitch . Grey under a value = its min-max, where the source gives both. 4.91 </ = = the source gives only that limit, modeled at it. ref = reference. L2 = the standard itself (or its complete free = 22.5° : 25.45 i . i 15°30° Width across corners preview, or the maker's drawing). L1 = two or more independent sources agree: the
Width across flats 4.82-5.00
k = 1.7 1.575-1.825 1.7 release gate.
Head height LO = one source only: printed amber and marked *. 1.575-1.825
c = a source value was corrected; the datasheet 2 Ig < 5.0, Is = 2.75 Wrenching height 2 1.10 says how.
' House convention = a detail no source dimensions, 9.175 drawn to a stated house rule. r2 0.10, das 3.1 Washer face height . This size's values: L2 15 - L16. 8.10-0.25
Notes
2 4.34c s: modeled at the middle of its band; e and kw are
checks, not modeled.
Bearing face diameter
| = 16 shown Head top chamfer, deg lengths 16-25
Underhead fillet radius
b = 11 ref
Transition diameter
2.43 2.36-2.50
= 50° (ISO 4753 CH) Shank diameter
Thread length ah RO
Lt
d1 = 2.0129
Transition length Basic minor diameter (end face) View from above
Tap drill (method d - P)
End chamfer angle, deg s = 4.91 4.82-5.00
e25.45
TITLE
'? CommunityCAD Size drawing, M2.5
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 4014:2022 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Hex head bolt - M2.5
SHEET REV SCALE PROJECTION UNITS CC-1804014-SZ-M2.5 A 5:11 € Dimensions in mm
SPEC VERSION LICENSE PAGE cfd05b053c736a4F15ba3030aa41febd40cdc205 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
