ISO 4028 hexagon socket set screw, dog point, M2.5
Size drawing - M2.5 values on the views - | = 5 shown - enlarged 10:1
Thread pitch
d1 = 2.0129 View on the socket end 1.2875 I Socket across flats i 1.275-1.300
a = 50° (CH)
2 1.454 Socket across corners
Socket depth, short lengths
s = 1.2875 1.275-1.300 Socket depth, other lengths
|= 5 shown
lengths 3-12 . 1.375 NI Dog diameter 1,25-1.50
T 0.755 Dog length, short lengths
z= 1.375 B <= 50° (ISO 4753 SD/LD) 8° 65°0-88 1.25-1.50
1.375 1.25-1.50
Dog length, other lengths
< Dog chamfer to axis, deg < 58
Basic minor diameter (end face)
Tap drill (method d - P)
Socket-end chamfer angle, deg
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L2 6 - L117.
Notes
Short lengths (sheet DO1) take the 'short' t and z.
TITLE
'? CommunityCAD Size drawing, M2.5
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 4028:2003 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Set screw, dog point - M2.5
SHEET REV SCALE PROJECTION UNITS CC-1S804028-SZ-M2.5 A 10:1 € Dimensions in mm SPEC VERSION LICENSE PAGE cfd05b053c736a4F15ba3030aa41febd40cdc205 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
