M2.5 Cone Point Set Screw, ISO 4027 size drawing (PDF)

Datasheet — M2.5 Cone Point Set Screw, ISO 4027 by Milo

Open the PDF
M2.5 Cone Point Set Screw, ISO 4027Get the CAD modelM2.5 Cone Point Set Screw, ISO 4027CC-ISO4027-SZ-M2.5.pdf

Text of this datasheet

ISO 4027 hexagon socket set screw, cone point, M2.5

Size drawing - M2.5 values on the views - | = 4 shown - enlarged 20:1

d1 = 2.0129 a = 50° (CH)

Thread pitch

1.2875 1.275-1.300

Socket across flats

2 1.454 Socket across corners

Socket depth, short lengths

|= 4 shown lengths 2.5-12 Socket depth, other lengths

Cone flat diameter

Cone angle (included), deg

Cone angle, short lengths, deg

y = 90°, included (ISO 4753 TC)

Basic minor diameter (end face)

Tap drill (method d - P)

Socket-end chamfer angle, deg

Source levels

Main value = the modeled value (nominal, else the middle of min-max).

Grey under a value = its min-max, where the source gives both.

< / = = the source gives only that limit, modeled at it. ref = reference.

L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate.

LO = one source only: printed amber and marked *.

View on the socket end c = a source value was corrected; the datasheet says how.

House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L2 6 - L117.

Notes

Short lengths (sheet DO1) take the 'short' t and the cone angle.

s = 1.2875 _1.275-1,300

TITLE

'? CommunityCAD Size drawing, M2.5

STANDARDS FOLLOWED FAMILY / DETAIL

ISO 4027:2003 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Set screw, cone point - M2.5

SHEET REV SCALE PROJECTION UNITS CC-1804027-SZ-M2.5 A 20:1 € Dimensions in mm SPEC VERSION LICENSE PAGE cfd05b053c736a4F15ba3030aa41febd40cdc205 CC-BY 4.0 IronPixel Labs LLC 1/1

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.