* CC-DINS62-DS-M2 revA '?) CommunityCAD Size datasheet - M2
DIN 562 M2 thin square nut
Size datasheet: this size's values with their levels, conventions and sources.
Thread M2 x 0.4, ISO metric coarse, right hand Files 2 STEP AP214 (simplified + threaded) Simplified - M2, front view, 6:1 Threaded - M2, front view, 6:1 Sym. Dimensi Value Level P Thread pitch (coarse) 0.4 L1- 2 s Width across flats 3.85 L1- 2 3.7-4 e Width across corners >5 L1 - 2 m Nut height 1.0c L1- 2 0.8-1.2 D1 Basic minor diameter (crests) 1.567 L1- 2 tap Tap drill (method D - P) 1.6 L1- 2
Modeled value: nominal, else the midpoint of min-max. s / =: only that limit is given. * amber: one source (LO). c: a source value was corrected. Level - independent sources. e follows from s and is checked against e min. s min and m min: the makers' band (ADR 0071).
DIN 562:2013-05 - ISO 68-1/ ISO 261 (thread) Page 1/2 Thin square nut - M2 - both detail levels - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec 82d0e3f1e4052a4ec559d0F9Fd7b4cF7b5772671
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
CC-DINS62-DS-M2 revA Size datasheet - M2
'?) CommunityCAD
Conventions
e Square: sharp at the modeled s (the middle of its band), one corner on +X.
e Both faces plain and sharp, no chamfer (the standard draws none).
« No countersink on either face.
¢ Bore: plain at D (simplified); ISO 68-1 basic internal thread over the full height (threaded), running out at both faces.
« Sharp edges, no markings. Values given only as a limit are modeled at that limit. Features the standard does not dimension are house conventions.
Sources
Source Publisher Retrieved sha256 wikipedia-iso261 Wikipedia 2026-10-23 66b9F05884bb amesweb-tap-drill AMESweb 2026-10-23 e6501cc1414a pule-tap-drill CommunityCAD 2026-10-23 625b582c306e pule-basic-minor CommunityCAD 2026-10-23 00329692204 pule-iso04759-1-nut-width-din562 CommunityCAD 2026-10-27 37dcb1b2c7d2 pule-iso4759-1-nut-height-din562 CommunityCAD 2026-10-27 db4e0480f329 fasten-it-din562 fasten.it 2026-10-26 #3591a71608c fasteners-eu-din562 fasteners.eu 2026-10-26 #1db7e078128 cde-din562 CDE Fasteners, Inc. 2026-10-27 55ecbéca03b3 (kept outside the repo) wegertseder-din562 Wegertseder GmbH 2026-10-26 dbc2becbce285
The whole series (verification map, corrections, drawings): CC-DIN562-DS.
DIN 562:2013-05 - ISO 68-1/ ISO 261 (thread) Page 2/2 Thin square nut - M2 - both detail levels - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec 82d0e3f1e4052a4ec559d0F9Fd7b4cF7b5772671
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.