M2 Thin Hex Nut, ISO 4035 size drawing (PDF)

Datasheet — M2 Thin Hex Nut, ISO 4035 by Milo

Open the PDF
M2 Thin Hex Nut, ISO 4035Get the CAD modelM2 Thin Hex Nut, ISO 4035CC-ISO4035-SZ-M2.pdf

Text of this datasheet

ISO 4035 hexagon thin nut (style 0), M2

Size drawing - M2 values on the views - enlarged 10:1

@ = 115° 110°-120°

View from above

Sym. Dimensi

Thread pitch 8-4

3.91 3.82-4.00

Width across flats

2 4.32 Width across corners

1.075 0.95-1.20

Nut height

> Wrenching height 2 6.88

3.10 Bearing face diameter

2.15 2.00-2.30

Countersink diameter

22.5 15-30

Corner chamfer angle, deg

115 110-120

Countersink angle, deg

1.567 Basic minor diameter (crests)

tap Tap drill (method D - P) 7.6

Source levels

Main value = the modeled value (nominal, else the middle of min-max).

Grey under a value = its min-max, where the source gives both.

< / = = the source gives only that limit, modeled at it. ref = reference.

L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate.

LO = one source only: printed amber and marked *.

c = a source value was corrected; the datasheet says how.

House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L2 10 - L16.

Notes

s: the nominal is the wrench size (= s max); modeled at the middle of its band (ADR 0014).

e is not modeled on its own: the regular hexagon gives e = 2s/v3 from the modeled s, = e min. dw min sets the corner chamfer's face circle, (dw min + s) / 2; mw min is checked at mid-flat. No washer face: ISO 4035 has no washer face form, so there is no c (ADR 0040 row 5).

TITLE

'? CommunityCAD Size drawing, M2

STANDARDS FOLLOWED

ISO 4035:2012 - ISO 68-1 / ISO 261 (thread)

FAMILY / DETAIL

Hexagon nut - M2

SHEET

CC-1S04035-SZ-M2

REV SCALE PROJECTION

A 10:1

UNITS

Dimensions in mm

SPEC VERSION

LICENSE

cfd05b053c736a4F15ba3030aa41Febd40cdc205 CC-BY 4.0 IronPixel Labs LLC

PAGE

1/1

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.