DIN 127 split lock washer, form B, M2
Size drawing - M2 values on the views - enlarged 10:1
Sym. Dimensi
di Bore diameter
d2 Outside diameter (max)
Section width
Section thickness
Section corner radius
Free height, form B
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing). d2 s 4.4 L1 = two or more independent sources agree: the release gate.
' LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule.
View fro|
This size's values: L16.
Notes
The outside is d1+ 2b at the modeled values; d2 is the standard's maximum.
Helix, split and section corners: house conventions from the owner's #581 answers, DO2.
TITLE
'? CommunityCAD Size drawing, M2
STANDARDS FOLLOWED FAMILY / DETAIL
DIN 127:1987 Split lock washer, form B - M2
SHEET REV SCALE PROJECTION UNITS CC-DIN127-SZ-M2 A 10:1 € Dimensions in mm SPEC VERSION LICENSE PAGE e79bc69c722a7450eb0be681b46a36c48d05506e CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.