ISO 4762 hexagon socket head cap screw, M2
Size drawing - M2 values on the views - | = 6 shown - enlarged 10:1
Source levels Sym. Dimensi Main value = the modeled value (nominal, else the
middle of min-max). Thread pitch 9.4 Grey under a value = its min-max, where the source gives both. 3.71 < / = = the source gives only that limit, modeled at it. 3.62-3.80 ref = reference. L2 = the standard itself (or its complete free preview, < 3.98 or the maker's drawing). L1 = two or more independent sources agree: the 1.93 release gate.
Head height 1.86-2.00 LO = one source only: printed amber and marked *.
Head diameter, plain
Head diameter, knurled
c = a source value was corrected; the datasheet says 1.55 how. 1.52-1.58 House convention = a detail no source dimensions,
Socket across flats
View fro > 1.733 drawn to a stated house rule.
Socket across corners This size's values: L2 1- L119 - LO 2.
Notes
s: the nominal is the key size; the socket is modeled at
Socket depth the middle of its band.
1.52-1.58 Wall under socket
( \ N < 0.2
Head top chamfer
lengths 3-20 r= 0.2%, das 2.6 Underhead fillet radius Boz
r0.1-0.3 0.1-0.3
<= 50° (ISO 4753 CH) Shank diameter 1 * mn
< Transition diameter S doo
> Bearing face diameter ae
Thread length MS Re
Basic minor diameter (end face) 1.567
Tap drill (method d - P) Dot
End chamfer angle, deg
TITLE
'? CommunityCAD Size drawing, M2
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 4762:2004 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Socket head cap screw - M2
SHEET REV SCALE PROJECTION UNITS CC-1804762-SZ-M2 A 10:1 € Dimensions in mm SPEC VERSION LICENSE PAGE 54d2547caedeObédef71904216be1e6990995d2a CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.