CC-1S04762-DS-M2 reve Size datasheet - M2
'?) CommunityCAD
ISO 4762 M2 hexagon socket head cap screw
Size datasheet: this size's values with their levels, its lengths, conventions and sources.
Thread M2 x 0.4, ISO metric coarse, right hand Lengths 9 generated, | = 3-20 Files 18 STEP AP214 (simplified + threaded) Simplified - M2x20, front view, 2.5:1 Threaded - M2x20, front view, 2.5:1 Sym. Dimensi Value Level P Thread pitch 0.4 L1- 4 dk Head diameter, plain 3.71 L1 - 3 3.62-3.80 dk Head diameter, knurled < 3.98 L1 - 3 k Head height 1.93 L1 - 3 1.86-2.00 s Socket across flats 1.55 L1- 2 1.52-1.58 e Socket across corners > 1.733 L1 - 2 t Socket depth >1 L1- 3 w Wall under socket > 0.55 L1- 3 Vv Head top chamfer < 0.2 La - 2 rm Underhead fillet radius 0.2* lo -1 0.1-0.3 ds Shank diameter 1.93 La - 2 1.86-2.00 da Transition diameter < 2.6 La - 3 dw Bearing face diameter > 3.48 La - 2 b Thread length 16 ref L1- 2 di Basic minor diameter (end face) 1.567 L1-2 tap Tap drill (method d - P) 1.6 La - 2
a End chamfer angle, deg
Modeled value: nominal, else the midpoint of min-max. s / =: only that limit is given, modeled at the limit. * amber: one source (LO). c: a source value was corrected. Level - independent sources.
ISO 4762:2004 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Page 1/2 Socket head cap screw - M2 - both detail levels - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec 54d2547caedeObédef71904216be1e6990995d2a
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
CC-1S04762-DS-M2 reve Size datasheet - M2
'?) CommunityCAD
Lengths | Thread Is Ig Part key 3 to the head - - is04762-m2x3 4 tothe head - - is04762-m2x4 5 tothe head - - is04762-m2x5 6 tothe head - - is04762-m2x6 8 tothe head - - is04762-m2x8 10 tothe head - - 1is04762-m2x10 12 tothe head - - is04762-m2x12 16 tothe head - - is04762-m2x16 20 partial >2 < 4 is04762-m2x20
Is = plain shank (min), Ig = bearing face to the first full thread (max). To the head: full thread up to 3P from the bearing face. Listed by one source only, not generated: | = 18.
Conventions
¢ End: ISO 4753 chamfered end (CH), end face at d1, chamfer at the angle limit.
« Socket: regular hexagon at the modeled s, sharp corners, one corner on +X, flat floor at t.
« Head (threaded level): fine straight knurl, 0.3 mm pitch, lands at dk knurled. Simplified: plain cylinder at dk.
¢ Thread (threaded level): ISO 68-1 basic profile; full thread to Ig, quarter-turn fade toward the head.
« Values given only as a limit are modeled at that limit. Features the standard does not dimension are house conventions.
Sources Source Publisher Retrieved sha256 fasten-it-iso04762 fasten.it 2026-10-23 8274205f7c65 fasteners-eu-iso4762 fasteners.eu 2026-10-23 3f1e339d7d13 opac-iso4762 OPAC 2026-10-23 cd715748c9ea amesweb-iso4762 AMESweb 2026-10-23 23dba59716fb amesweb-tap-drill AMESweb 2026-10-23 e6501cc1414a pule-tap-drill CommunityCAD 2026-10-23 625b582c306e rule-basic-minor CommunityCAD 2026-10-23 00329692204 iso4753-2011-sample ISO (preview published by iTeh n/a 7526d25f9381 (kept outside the repo) Standards) fasteners-eu-iso4762-lengths fasteners.eu 2026-10-23 3f1e339d7d13 amesweb-iso4762-Lengths AMESweb 2026-10-23 34905cd282b9
The whole series (verification map, corrections, drawings): CC-ISO4762-Ds.
ISO 4762:2004 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Page 2/2 Socket head cap screw - M2 - both detail levels - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec 54d2547caedeObédef71904216be1e6990995d2a
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.