M2 Small Flat Washer, ISO 7092 size drawing (PDF)

Datasheet — M2 Small Flat Washer, ISO 7092 by Milo

Open the PDF
M2 Small Flat Washer, ISO 7092Get the CAD modelM2 Small Flat Washer, ISO 7092CC-ISO7092-SZ-M2.pdf

Text of this datasheet

ISO 7092 plain washer, small series, grade A, M2

Size drawing - M2 values on the views - enlarged 10:1

Dimension

2.20 2.20-2.34

Hole diameter (nom = min)

4.5 4.2-4.5

Outside diameter (nom = max)

0.3 0.25-0.35

Thickness

Source levels Main value = the modeled value (nominal, else the middle of min-max). h=03 Grey under a value = its min-max, where the source gives both.

TS SS I | —t 0.25-0.35 < / = = the source gives only that limit, modeled at it. ref = reference.

L2 = the standard itself (or its complete free preview, or the maker's drawing).

L1 = two or more independent sources agree: the release gate.

LO = one source only: printed amber and marked *.

c = a source value was corrected; the datasheet says how.

House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L2 3.

Notes

d1 nom = d1 min and d2 nom = d2 max (the standard's own convention); h nom lies in its band. Edges are sharp, walls square to the faces: house conventions, sheet DO2.

View from above

TITLE

'? CommunityCAD Size drawing, M2

STANDARDS FOLLOWED FAMILY / DETAIL

ISO 7092:2000 Plain washer, small series - M2 SHEET REV SCALE PROJECTION UNITS CC-1S07092-SZ-M2 A 10:1 € Dimensions in mm SPEC VERSION LICENSE PAGE

cfd05b053c736a4F15ba3030aa41Febd40cdc205 CC-BY 4.0 IronPixel Labs LLC 1/1

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.