M2 Hex Nut, ISO 4032 / DIN 934 datasheet (PDF)

Datasheet — M2 Hex Nut, ISO 4032 / DIN 934 by Milo

Open the PDF
M2 Hex Nut, ISO 4032 / DIN 934Get the CAD modelM2 Hex Nut, ISO 4032 / DIN 934CC-ISO4032-DS-M2.pdf

Text of this datasheet

CC-1S04032-DS-M2 revA Size datasheet - M2

'?) CommunityCAD

ISO 4032 M2 hexagon regular nut

Size datasheet: this size's values with their levels, conventions and sources.

Thread M2 x 0.4, ISO metric coarse, right hand

Part key iso4032-m2

Files 2 STEP AP214 (simplified + threaded)

Threaded - M2, front view, 8:1

Sym. Dimension Value P Thread pitch 0.4 s Width across flats 3.91 3.82-4.00

e Width across corners 2 4.32 ss m Nut height 1.475 1.35-1.60

mw Wrenching height 2 i

dw Bearing face diameter 2 3.10 = da Countersink diameter 2.15 2.00-2.30 c Washer face height (not modeled) 0.15 6.10-0.20 B Corner chamfer angle, deg 22.5 15-30 8 Countersink angle, deg 105 90-120 D1 Basic minor diameter (crests) 1.567

tap Tap drill (method D - P) 1.6 La + 2

Modeled value: nominal, else the midpoint of min-max. < / =: only that limit is given. * amber: one source (LO). c: a source value was corrected. Level - independent sources. e follows from s and is checked = e min; dw min sets the chamfer's face circle; mw min is checked at mid-flat; c is data only.

ISO 4032:2012 - ISO 68-1/ ISO 261 (thread) Page 1/2 Hexagon nut - M2 - both detail levels - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec cfd05b053c736a4f15ba3030aa41f ebd40cdc205

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.

---

* CC-1S04032-DS-M2 revA '?) CommunityCAD Size datasheet - M2

Conventions

e Hexagon: regular at the modeled s (the middle of its band), one corner on +X, sharp edges.

« Corner chamfer on both faces: a cone at B (range midpoint) meeting the face on (dw min + s) / 2. Not specified by the standard. « Countersink on both faces at da and 9, both at their range midpoints.

¢ Bore: plain at D (simplified); ISO 68-1 basic internal thread over the full height (threaded), cut by the countersinks.

« No washer face, no markings. Values given only as a limit are modeled at that limit. Features the standard does not dimension are house conventions.

Sources

Source Publisher Retrieved sha256

amesweb-tap-drill AMESweb 2026-10-23 e6501cc1414a

pule-tap-drill CommunityCAD 2026-10-23 625b582c306e

pule-basic-minor CommunityCAD 2026-10-23 00329692204

fasteners-eu-iso04032 fasteners.eu 2026-10-25 b9077Sa2aa03

fasten-it-is04032 fasten.it 2026-10-25 6c2c140d9876

amesweb-iso4032 AMESweb 2026-10-25 0213f81cc358

iso4032-2012-sample ISO (preview published by iTeh Standards) n/a 100e675e82ee (kept outside the repo)

The whole series (verification map, corrections, drawings): CC-ISO4032-DS.

ISO 4032:2012 - ISO 68-1/ ISO 261 (thread) Page 2/2 Hexagon nut - M2 - both detail levels - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec cfd05b053c736a4f15ba3030aa41f ebd40cdc205

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.