ISO 4032 hexagon regular nut (style 1), M2
Size drawing - M2 values on the views - enlarged 10:1
@ = 105° 90°-120°
s = 3.91 3.82-4.00
ez 4.32
View from above
Sym. Dimensi
Thread pitch 8-4
3.91 3.82-4.00
Width across flats
2 4.32 Width across corners
1.475 1.35-1.60
Nut height
> Wrenching height 2 1.18
3.10 Bearing face diameter
2.15 2.00-2.30
Countersink diameter
22.5 15-30
Corner chamfer angle, deg
105 90-120
Countersink angle, deg
1.567 Basic minor diameter (crests)
tap Tap drill (method D - P) 7.6
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L2 11-L16.
Notes
s: the nominal is the wrench size (= s max); modeled at the middle of its band (ADR 0014). e is not modeled on its own: the regular hexagon gives e = 2s/v3 from the modeled s, = e min. dw min sets the corner chamfer's face circle, (dw min + s) / 2; mw min is checked at mid-flat. Washer face c is not modeled (nuts are delivered without one); it is listed in the datasheet.
TITLE
'? CommunityCAD Size drawing, M2
STANDARDS FOLLOWED
ISO 4032:2012 - ISO 68-1/ ISO 261 (thread)
FAMILY / DETAIL
Hexagon nut - M2
SHEET
CC-1S04032-SZ-M2
REV SCALE PROJECTION
A 10:1
UNITS
Dimensions in mm
SPEC VERSION
LICENSE
c11b872e81fe4ea779a93a8b42a2cSdadf16472d CC-BY 4.0 IronPixel Labs LLC
PAGE
1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.